Click to enlarge
Laser cutting advantages over other thermal cutting methods
1. The cutting quality is good:Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of cutting pieces can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can be used as the final working procedure, parts can be even used directly without mechanical processing.
(3) Heat affected zone is very small, material performance is hardly affected near the kerf width , and the workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes appear to be regular.
2. Highly automation:
Adopts digital control, you only need to use CAD to draw the picture and
3. High cutting efficiency:
Due to the transmission properties of laser, laser cutting machine has equipped with many sets of CNC work bench to realize numerical control. You only need to change the CNC program to cut different shape, as well as for two-dimensional cutting, and three-dimensional cutting.
4. Fast cutting speed:
The cutting speed can be up to 600 cm/min when using 1200W laser to cut 2mm low carbon steel plate, and can up to 120 m/min when cutting 5mm polypropylene resin plate. Material does not need clamping fixed for cutting, thus can save the jig and auxiliary time for material upload and download.
5. Non-contact cutting:
There is no contact for work piece and laser head, so there is no tool wear. No need to change "tool" for different shapes parts processing, only need to change the output parameters. Laser, low noise, small vibration, and no pollution while cutting.
6. Variety cutting material:
Compared with oxyacetylene cutting and plasma cutting, laser can cut many kinds of materials, including
Parameters:
| Model | GS-LFD3015-L1 | GS-LFD3015-L2 |
| Output power of laser source | 500W | 1000W |
| Cutting area (L*W) | 3000mm × 1500mm | |
| Z axle stroke | 150 mm | |
| Max. cutting speed | 36m/min | 40m/min |
| Max. positioning speed | 140m/min | |
| Platform size/Max height of feeding material | 4250x2500mm/more than 120mm | |
| Cooling | water cooling | |
| Laser wavelength | 1070nm | |
| Min. cutting gap | ≤0.1mm | ≤0.125mm |
| Positioning accuracy of X, Y and Z axles | ±0.03 mm | |
| Repeated positioning accuracy of X, Y and Z axles | ±0.02 mm | |
| Thickness of cutting material (according to material) |
0.2-8mm | 0.2-12mm |
| Drive model | ||
| Voltage | 380V,50/60Hz | |
| Temperature | 5ºC-45ºC | |
| Continuous working time | 24 Hours | |
| Machine weight | ||
| Outer dimension | 4350mm x 2280mm x 1500mm | |
| Total protection level of power supply | IP54 | |
Application Industry of 1000W CNC Tube/Meta
Widely used in sheet meta meta
Laser Cutting Machine Cutting Materials of 1000W CNC Tube/
Cutting Machine
It is used to cut the
Cutting Samples
Compare of different laser sources
| Model of Laser Source | Fiber | CO2 | Disc |
| Electro-optical Conversion Efficiency | 30% | 10% | 15% |
| Max. Output | 50Kw | 20Kw | 8Kw |
| BPP(4/5Kw) | <2.5 | 6 | 8 |
| Life of Diode Pumped | >100,000 | NA. | 10,000 |
| Occupied Area(4/5Kw) | <1M2 | 3M2 | >4M2 |
| Maintenance | no need | need | Often |
| Soft Processing | more suitable | unsuitable | suitable |
| Stability | best | good | good |
| Absorption rate%--steel | 35 | 12 | 35 |
| Absorption rate%--aluminum | 7 | 2 | 7 |
| Replaced Parts | High brightness semiconductor laser broadband single core, more than 100,000 hours of pump. Damage to one of the semiconductor does not affect the normal work of the laser, but less and less power, because each semiconductor pump sources are used to separate each other. | Laser work requires gas supplement, reflection lens replacement. |
Semiconductor Bar (array) maximum pulse model 5000 hours or 10000 hours continuous mode. Laser use the pump sources are used in the process of often need to change, each time change need to be between $200,000-230,000. |
The Laser Cutting Head Advantages Of 1500W YAG/CO2/Fiber CNC Meta
Please let us know following informations:
1.What kind of materials you want to cut ?
2.What is the mostly used thickness and what is the maximum thickness?
3. What is the MAX. dimension of your materials ?
4. After cut, what will be the
5. Are you an end user or reseller?
According to your above information,we'll recommend the most suitable machine to you.