Click to enlarge
1.Provides on site records of the perpendicularity of drilled holes and the shape of cross sections in high accuracy;
2.Testing the diameter, plumb rate, expanding or shrinkage position and dip direction of the drilling hole cast-in-place pile;
3.Testing the width, plumb rate, expanding or shrinkage position and dip direction of the underground diaphragm wall;
4.Testing sediment thickness;
5.According to the tested results to guide the field construction, optimize the construction process, and improve the construction quality and efficiency.
Features:
1.Full digitalization. The whole testing processing and the winch can be automatically controlled using the software. Meanwhile, the measured data and results can be digital display, storage and print output;
2.In the field, the result image can be printed directly and copied to U disk;
3.Continuous testing function in case of interrupting. The power of host is supplied by high energy rechargeable lithium battery, so the host is not affected when AC 220V voltage is interrupted. The test processing can be continued and the testing data cannot lose after AC voltage is put on;
4.The host is stable and reliable. The stable and reliable host is based on the higher performance low power embedded system and the Linux software operation system;
5.The sensor device is lift by double steel wire rollers independently and automatically controlled to stop at the casing and at the bottom of the hole, and the signal cable is work auto-synchronously;
6.The multi-function sensor device is combined on ultrasonic sensors and probe sensors. The ultrasonic sensors are used to measure the diameter and the probe sensors are used to measure the sediment thickness at the bottom. The two functions can be finished at the same time.
7.The analysis software on PC can display the color image of the shape of cross sections, calculate the diameters and perpendicularities at all depth position of the hole and display in a table, count the minimum/maximum diameter values and perpendicularity values and point the corresponding depth position.
Technical Specification:
TS-K100QC(B) Fully automatic winch
| Winch type | Fully automatic | Power Supply | AC140V~260V,50Hz |
| Up/Down Speed | 0~10m/min | Depth accuracy | ≤9mm |
| Bottom and casing sensing system | Automatic sensing by limit switch | Synchronous cable | Integrated signal cable on the winch,CNC synchronous lifting |
| Up/down movement distance | 100m/150m optional | Probe suspension | the probe is hung by two independent steel wire rollers |
| Dimension(mm) | 100m Winch:1040×660×800 150m winch:1050×840×850 |
Quality(KG) | 100m winch:110KG 150m winch:140KG |
| Operating temperature | -10ºC~+50ºC | Humidity | 0~90% |
TS-K100DC(B) Portable winch
| Winch type | automatic | Power Supply | AC140V~260V |
| Up/Down Speed | 0~10m/min | Depth accuracy | ≤9mm |
| Bottom and casing sensing system | Automatic sensing by limit switch | Synchronous cable | Manual cable roller |
| Up/down movement distance | 100m / 150m optional | Probe suspension | the sensor device is hung by two independent steel wire rollers |
| Dimension(mm) | 100m winch:660×550×700 150m winch:840×550×700 |
Quality(KG) | 100m winch:60KG 150m winch:80KG |
| Operating temperature | -10ºC~+50ºC | Humidity | 0~90% |