1. Drilling mud vibrating screen is the core equipment used for drilling mud purification.

2. According to the actual use of drilling engineering, combined with on-site practical experience, developed a flexible and efficient simple drilling mud shaker.

3. Through the field application, received a good effect.

Suitable for mine drilling fluid purification, drilling fluid vibrating screen can also be used as the bottom of the mud cleaner vibrating screen.

 

Drilling mud vibrating screen is a solid control equipment in the drilling mud solid control system, is to deal with the back from the bottom of the mud up to 0.074 mm above the solid particles of mud.(Solid phase with drilling fluid greater than 0.074 mm is not good for drilling fluid performance.) The device uses a vibration motor, according to the principle of self-synchronization to achieve a sieve box in a certain direction of linear motion.

 
Technical parameter table:

Vibration Frequency	1450 times /min
Amplitude	2.4mm
Processing Capacity	50m³/h
The largest particles under the screen	74μm
Screen Area	1.1m²
Dimensions	2410×1650×1580 mm
Weight	388kg

Advantage:

1. Using solid works design, optimize the structure, simple structure, high performance.

2. High vibration intensity, large screen area, adjustable screen box angle.

3. Replacement is simple, save time, save labor costs.

4. The height of the unit is rationally designed to reduce the direct impact on the screen.

5. Lift structure is simple, easy to operate.

6. Than the average linear vibrating screen, processing capacity increased by 20% -30%, sand removal chip removal rate increased by 10% -20%.