Click to enlarge
There are many other models can be provided. if you were interested, please contact with us.
The technical datas of ZFB26B are listed in below chart.
|
最大输出转矩
Max Output Torque
T2mx Nm
|
挖掘机 Excavator | 10000 | |||||
| 起重机 Crane | 16500 | ||||||
|
传动比
Ratio
|
31.36,37.8,43.9,51.52,55.2,63 | ||||||
|
液压马达
Hydaulic Motor
|
林德和力士乐及国内外各种型号马达，并可根据用户的实际需求而设计马达接口。 Linde,Rexroth and other kinds of domestic and overseas motor are suitable.Desing the connection interface between motor and planetary drive according to customer's requirements. | ||||||
|
重量约Kg (无液压油、无马达）
Planetary gearbox weight/approx.kg
(without hydraulic oil and motor)
|
225 | ||||||
|
输出齿轮
Output Gear
|
输出齿轮模数m=8,10,12,14 变位系数x=0.5
Module of output gear 8,10,12,14mm,
modification coefficient:X=0.5
|
||||||
Note:
1. Gearbox output direction is same as the in put direction.
2. For more ratios, please contact our technical department.
3. For easily install and adjust the backlash of gear of slewing bearing, the bearing seat of planetary gearbox can be made with eccentricity 2.5mm
4. If you require special drive solution which is out of the scope of our current products, please let us know. We will provide you with a modified design to better meet your requirements
2. For more ratios, please contact our technical department.
3. For easily install and adjust the backlash of gear of slewing bearing, the bearing seat of planetary gearbox can be made with eccentricity 2.5mm
4. If you require special drive solution which is out of the scope of our current products, please let us know. We will provide you with a modified design to better meet your requirements