Request for raw materials:
1.In order to ensure the good quality and mechanical strength of the final product, special care should be taken to ensure that the granule size fed to the machine is maintained below 3mm, preferable in the range of40% small than 1mm, with no more than 10% over 2mm.
2. The moisture content of the mixture has also a critical effect on the quality of the final product, so it should be kept in the range of 8-20%.

Major role and characteristics:
The machine can press all kinds of mineral powder, metal powder, coal powder, coke powder and other materials to make them molded. Because of the mandatory squeeze roller,so the products have the three high characteristics: high density,high strength, high hardness. Because of the mandatory squeeze rollers, so the products have high density, high strength,
high hardness, and the local roll is used in 65Mn hard materials with good wear resistance.

The working principle
When working, the belt, to the reducer, reducer via the coupling to the driving shaft, a pair of open gear, guarantee two roller synchronous (constant velocity reverse) material storage bin by quantitative equipment evenly into the molding hopper, the unit forming pressure material from small to large, reached a maximum value at the center line of the roller at the molding pressure, material through the line, molding pressure diminishes rapidly make the material into the ball smoothly off, off ball.

Our professional service:
According to the character of customer's material, the different demand of capability, the different shape and size of final product, we specialize in supplying you the fittest device. Sending the professional technical personnel to install.