- Brand Name:
- SMAR
- Model Number:
- SAE-MY601C-2B
- Type:
- Door Viewers
- Material:
- Other
- Angle:
- Other
(1)2.8 inch TFT LCD screen (6)Digital zoom (2)Doorbell speaker (7)Battery compartment (3)Power light (8)Volume key (4)Power on/off (9)Monitoring probe (5)Doorbell selections (10)Doorbell key
II Product Parameters
Name Shape parameter Indoor Size of shape:130*112mm Thickness:18mm Screen size:2.8 inch TFT LCD Resolution image:240*320RGB Digital zoom:Three times Power source :6V 4 PCS AA batteries Power consumption :1.5W Outdoor unit Size:60mm*15mm*48mm Camera pixels:300000 Installation size Door thickness:35-75mm(applicable Nut with door thickness small 35-55mm,big:55-75mm) Mounting hole size:14mm
III Products Features
1. Convenient installation,the battery can be replaced without removing the host and/or cat's eye,by direct open the host plane battery cover; 2. Leading industry innovations by using 4 PCS conventional AA batteries which ensure significantly longer working time; 3. Indoor unit with battery display function,battery remaining 1division remind user to change a new one; 4. 32 bell chord tones to select from(with separate selection keys for selection); 5. Use the security camera chip,three times digital zoom,image is clearer; 6. 15S automatic shutdown,users need not worry about battery runs out quickly if forgetting shutdown; 7. 90 degree wide Angle,bigger than conventional doorbell. IV Installation
1. Measure the door hole diameter being 14 to 15mm. 2. Connect the cable of outdoor unit with ejector sleeve through peephole; please be careful in order to prevent destroying the cable. 3. Fasten the base plate and outdoor unit. 4. Connect the cable with indoor unit.Be careful in order to prevent destroying the cable. 5. Tighten the screws,and fasten the indoor unit. 6. Put the batteries in and test unit by ring the doorbell. How to use In normal use:after installation in accordance with the above instruction,Install 4 battery, press the keypower,the screen will bright,After connecting camera row line well will appear image A,and will display Battery symbol in the upper left corner ,pressZOOMbutton for one time,lmagewill be amplified 1/10 times, there are three times the amplification effect.(image B) If the doorbell music is loud you can adjust left side of the stall switch,high,medium,low can be selected.
VI Trouble shooting Cannot start up: 1. Check if the battery reached the boot voltage range DC5-6V; 2. Check that the row line is whether plugged well. Blue screen: Normally implies Row line doesn't plug in well Image is not clear:To protect the lens from being scratched,there is a thin layer of protective film on the lens of the products, please tear the film using your fingernail starting from the corner of the lens.Both indoor and outdoor unit have protective film. Tips:When the unit is not used for a long time,remove the batteries to avoid battery leakage. VII Packing list 1.Monitor(indoor unit)x1 2.Probe(outdoor unit)x1 3.14mm Ejector sleeves x2 4.Screw x2 5.User guide x1