Gleaming (Yunnan)International Trade Co.,Ltd.
China
 categorylink |
|
Drinking water purification equipment adopts reverse osmosis technology, which makes raw water pass through fine filter, granular activated carbon filter, compressed activated carbon filter, etc., and the pressurized by pump. A reverse osmosis membrane (RO membrane) with a pore size of 1/10000 um (equivalent to 1/6000 of the size of Escherichia coli and 1/300 of the size of virus) is used to change water with a higher concentration into water with a lower concentration. At the same time, industrial pollutants, heavy metals, bacteria, viruses and other larger amounts of impurities mixed in water are all isolated. So as to achieve the physical and chemical indicators and health standards of drinking regulations, and produce clean and pure water, which is the best choice for human body to supplement high-quality water in time.
Integrated Sewage treatment Equipment
The primary sedimentation tank, the first-stage and second-stage contact oxidation tanks, the secondary sedimentation tank and the sludge tank are integrated into a whole, and air blasting is carried out in the first-stage and second-stage contact oxidation tanks. So that the contact oxidation method and the activated sludge method are effectively combined, and the sewage treatment level is further improved. The treated effluent can be directly discharged into municipal pipelines or reused as reclaimed water.
The integrated sewage treatment equipment adopts advance biological treatment process, which integrates the removal of BOD5, COD and NH3-N, and is an effective sewage treatment equipment at present.
Fiber Reinforced Plastics Desulfurization Tower
It is made of fiber reinforce plastic, with high corrosion resistance and wear resistance, and long service life. The equipment manufacturing cycle is short, the complete set is installed, and the construction time is short.
There are no moving parts in the glass fiber reinforced plastic desulfurization tower, and the tower body is manufactured as a whole, which reduces the air leakage rate and effectively reduces the maintenance probability. There are three inside inside the desulfurization device can completely separate the gas and water, and the fan will not bring any water. The weight of the desulfurization tower is light, and the density is 1/3-1/4of the steel. High temperature resistance and good thermal stability
Fiber Reinforced Plastic Denitration Tower
In the wet denitration process, a special denitration agent or desulfurization by-product is used as a denitration agent, which has achieved good results in the removal of nitrogen dioxide, and the content of nitrogen oxides in the treated flue gas completely meets the emission standards.
The denitration tower is made of glass fiber reinforced plastic, which has high corrosion resistance and water resistance and long service life.
The equipment manufacturing cycle is short, and the complete set installation shortens the construction time.
Spray Tower
A. Has strong flexibility, can be designed into different shapes according to different spaces; in addition, the spray tower can be designed into spray towers with different internal structures according to air quantity , air pressure, absorption efficiency and waste gas type, so as to achieve the purpose of good treatment effect and economic investment.
B. Because the process of mass transfer and heat transfer occurs simultaneously in the process of gas and liquid contact, the spray tower not only had the function of dust removal, but also has the function of flue gas cooling and harmful gas absorption.
The operation cost of the spray tower equipment is low, the quick-wear parts do not exist, and the parts do not need to be replaced under normal operation. The temperature resistance of the material is higher than that of the traditional PP, PVC, PE and other materials, the temperature resistance of liquid can exceed 100 degree, and the material is an economical and practical material under special conditions of gas and absorption medium
|
|
